Papers Submitted

Sr. No.. Name Title of the paper Name of Journal Remark year
1 Shilpa Gite,MeetaKumar Analysis of Node Energy Consumption in Reactive MANET Using Optimal Path Selection IJCA In Process : Submitted Paper for reviewing for June 2013
2 Swati Kadlag Information theoretic clustering and Role of correlation and convolution based image filtering in successful and automatic Categorization of various vehicle profiles communicated thro' ICECCS-13  to Springer series of CCIS review is awaited 2013
3 Dr. Dipika Kaur Jaspal Biomolecules as catalysts for enolisation of Acetophenone and p-Bromoacetophenone: A comparative accoun   Not Yet Submitted 2013
4 Dr. Narayan Pisharoty "Implementation of Single Phase Multimode Matrix AC-DC Converter" A Novel Approach IEEE Transactions on Power Electronics review is awaited 2013
5 Dr. Narayan Pisharoty A Three Phase to Single Phase High Frequency Bi-Directional AC-AC Converter using Matrix Topology   Not Yet Submitted 2013
6 Abhaya Pal Singh Observer design for Non-Holonomic Systems Using Contraction Theory. International Journal of Electrical and Electronics Engineering (Scopus) Accepted for publication 2013
7 Abhaya Pal Singh Extended Range of control for Robotic Systems International Journal of Advanced Robotic Systems: Robot Control Under review 2013
8 Sayali Sandbhor Application of Neural Networks in resolution of disputes for escalation clause using Neuro solutions KSCE Journal of Civil Engineering Communicated 2013
9 Sayali Sandbhor Analysis of behaviour of real estate rates in Pune City JET Communicated 2013
10 T.P.Singh Development and validation of resource flexibility measures for manufacturing industry Journal of Industrial Engineering and Management Accepted, to be revised & submited 2013
11 T.P.Singh A TQM implementation model for enhancing competitiveness of Indin manufacturing firms International journal of performability Engineering (Scopus) Accepted will be published in july issue 2013
12 T.P.Singh Assessment of status of Regional innovation system with regard to small scale auto parts industry of Punjab, India Innovation Management policy and Practices (Sci, Scopus) Communicated 2013
13 T.P.Singh A Mathematical Model to predict Material Removal Rate during Electrical Discharge Machining of Cryogenically Treated Titanium Alloys (JEM- 13) Journal of Engineering Manufacture (Sci, Scopus) Communicated 2013
14 T.P.Singh Determination of safe limits of significant task parameters during manual lifting Workplace health and safety, AAOHN, Journal (Sci, Scopus) Communicated 2013
15 T.P.Singh APPLICATION OF ARTIFICIAL NEURAL NETWORKS FOR INDIAN STOCK MARKET FORECASTING – A REVIEW International Journal of Engineering and Technology Communicated 2013
16 Pritesh Shah Fractional Order Modeling using State Space Model   Accepted for publication 2013
17 Pritesh Shah Design and Implementation of Fractional Order PID Controller for Heat Exchanger Process IET Control System & Applications Not Yet Submitted July, 2013
18 Pooja Kamat,Meeta Kumar, Shilpa Gite Analysis of Peer to Peer Communication and its Security Concerns IJCA Communicated for June 2013
19 T.P.Singh & Ajay Batish Management of Change in Indian Automobile Industry- A Survey Accepted for Publication in Industrial Engg. Journal III Bombay   2013
20 Dr. K.C.Khare Spatial mapping pan evaporationusing genetic programming Irrigation Science; springer submiited ; waiting for review 2013
21 Dr. K.C.Khare A Conceptual Rainfall-Runoff Model Using the Auto Calibrated NAM Model for a gauged basin international conference on Hydraulic and Water Resources (HYDRO 2013) abstract submitted , IIT Madras 2013
22 Dr. K.C.Khare Forecasting of pan evaporation using data driven aproach International conference on Hydraulic and Water Resources (HYDRO 2013) abstract submitted, IIT Madras 2013
23 Brajesh Pandey Preferential orientation of magnetization in Co-Au multilayers Journal of Magnetism and Magnetic Material, IN Press In Press 2013
24 Gaurav Bansod Experimental Analysis and Implementation of Bit Level Permutation for Automotive Security   Under review 2013
25 Abhaya Pal Singh Fractional Equations of
Motion Via Fractional Modeling of Underactuated Robotics System
International Conference on Advanced Research in Engineering and Technology, ICARET 2013, Vijaywada, Hydrabad . (IEEE) Registered 2013
26 Dr. Dipika Kaur Jaspal Kinetics of enolisation of Acetophenone and p-Bromoacetophenone: Comparative studies Bulletin of Chemical Reaction Engineering & Catalysis (International Journal listed in SCOPUS) in Press 2013
27 Dr. Dipika Kaur Jaspal ZnO Nanoparticles Synthesis with controlled Morphology by using Natural Biodegradable Polymer and its Application as Catalyst for Oxidation of Aldehydes Journal of Organometallic Polymer Material Accepted 2013
28 Dr. Dipika Kaur Jaspal Enolisation kinetics of m-Nitro acetophenone Bulletin of Chemical Reaction Engineering & Catalysis Accepted 2013
29 Dr. Dipika Kaur Jaspal Isothermal Mathematical Modeling of Decolorizing Water using Activated Bottom Ash Journal of Environmental Health Science and Engineering Communicated 2013
30 R. Nagar Solar light assisted green synthesis of palladium nanoparticle decorated nitrogen doped graphene for hydrogen storage application Journal of Materials Chemistry A Accepted 2013
31 Rajesh Kherde TOPMODEL Parameter Optimization using Monte Carlo Simulation and Generalized Likelihood Uncertainty Estimation (GLUE) Package Journal of Environmental Hydrology Under Review 2013
32 Rajesh Kherde A GIS based Variable Source Area Conceptual Model For Large-Scale Basin Hydrology Journal of hydrology and hydromechanics Under Review 2013
33 Anindita Ghosh Electromagnetic interference shielding effectiveness of MWCNT-filled poly(ether sulfone) and poly(ether imide) based nanocomposites, Polymer Engineering & Science, 2013 (On revision)   on revision  
34 Auti Abhijeet, T. P. Singh, D. R. Pangavane ,A. Warke Study on reflector material optimization of a parabolic solar concentrator Journal of Mechanical Science and Technology Accepted 2013
35 Abhijeet Auti, Dr. Tejinder Sing Optimization of absorber for domestic solar desalination system using experimental and FE analysis Procedia Engineering Under Review 2013
36 Abhijeet Auti, Dr. T. P. Singh Optimization of Condenser Used for Domestic Solar Desalination System Using Theoretical and CFD Analysis Procedia Engineering Under Review 2013
37 Dr. Kanchan Khare A Conceptual Rainfall-
Runoff Model Using the Auto Calibrated NAM Model for a gauged basin"
HYDRO 2013 International
Conference on Hydraulics, Water resources, coastal and Environmental Engineering
Accepted 2013
38 Sayali Sandbhor Application of Neural Networks in resolution of disputes for escalation clause using Neuro solutions KSCE Journal of Civil Engineering Communicated 2013
39 Kamble, L.V., Panghwane D and Singh T.P Experimental Investigation of Horizontal Tube immersed in Gas-Solid Fluidized Bed of Large Particles using Artificial Neural Network International Journal of Heat and Mass Transfer Accepted 2013
40 Chauhan G., & Singh T.P. Resource flexibility for lean manufacturing: SAP-LAP analysis of a case study International Journal of Lean Six Sigma Accepted 2013
41 Preeti Mulay Threshold computation to discover cluster structure, a new approach Data & Knowledge Engineering Communicated 2013
42 Shraddha Phansalkar TRANSACTION AWARE VERTICAL PARTITIONING OF DATABASE (TAVPD) FOR RESPONSIVE OLTP APPLICATIONS IN CLOUD DATA STORES JOURNAL OF THEORETICAL AND APPLIED INFORMATION TECHNOLOGY Accepted 2013
43 Praveen Naidu V, Raj Kumar Design of Miniature CPW-Fed Dual Band Antenna Using Coupling Strips for GSM/Wi-Fi/WLAN Applications IEEE-INDICON (IIT Mumbai) 2013 Accepted 2013
44 Praveen Naidu V, Raj Kumar A Compact Rupee Shaped Dual Band Antenna for WiMAX and WLAN Applications ICWET 2013 proceedings of International Journal of Computer Applications 2013 Accepted 2013
45 Dr.K.C.Khare Selection of Significant Input Parameters for water quality prediction : a comparitive approach International Journal Advanced Soft Compu. Applications ( scopus index) submitted 2013
46 Dr.K.C.Khare Short Term Air Quality Forecast Using Data Driven Approaches International journal of Engineering & technology submitted 2013
47 Rajesh Kherde A GIS based variable source area distributed model for large-scale basin hydrology. Research Journal of Applied Sciences, Engineering and Technology Accepted 2013
48 Ranjith Maniyeri and Sangmo Kang Numerical study on bacterial flagellar bundling and tumbling in a viscous fluid using an immersed boundary method Applied Mathematical Modelling Accepted 2013
49 Ravindra Pratap Singh, Ajay Batish, Anirban Bhattacharya, T. P. Singh Determination Of Safe Limits Of Significant Task Parameters During Manual Lifting Aaohn-2013- Accepted For Publication In Workplace Health & Safety. 2014 Accepted 2013
50 Kumar S., Singh R., Batish A., Singh T.P A Mathematical Model to Predict Material Removal Rate During Electric Discharge Machining of Cryogenically Treated Titanium Alloys Journal of Engineering Manufacture, Part-B (SCI Listed), Accepted 2013
51 Kumar S., Singh R., Batish A., Singh T.P A hybrid Taguchi–Artificial Neural Network approach to predict surface roughness during electric discharge machining of titanium alloys Journal of machining science and technology Accepted 2014
52 Kumar S., Singh R., Batish A., Singh T.P Surface morphology characterization of cryogenically treated titanium alloys using cryogenically treated electrodes in powder mixed electric discharge machining process (PMEDM) Int. J. of advanced manufacturing technology (Springer), , SCI Uploaded after 1st revision 22.11.2013
53 Kumar S., Singh R., Batish A., Singh T.P Modeling the tool wear rate in powder mixed electro-discharge machining process using dimensional analysis of cryogenically treated electrodes Int. J. of advanced manufacturing technology Under review  
54 Kumar S., Singh R., Batish A., Singh T.P Study the effect of black layer on electrode wear ratio in powder mixed electric discharge machining of titanium alloys Int. j. of materials & product technology (Inderscience Publisher) submitted 02-12-13
55 Kumar S., Singh R., Batish A., Singh T.P Investigating the machining characteristics of Ti-5Al-2.5Sn titanium alloy using electric discharge machining process(EDM) SCI Journal submitted jan 2014
56 Kamble L.V., Panghwane D., & Singh T.P. Heat transfer studies using artificial neural networks- a review International Energy Journal, Regional energy resources Information centre (RERIC) Asian institute of Technology, Thailand Accepted 2014
57 Jatti, V.S., Laad, M., Singh, T.P. Taguchi approach for diamond-like carbon film processing Procedia Materials Science. [Scopus-Science Direct] Accepted  
58 Dhabale, R., Jatti, V.S., Singh, T.P. Multi-objective optimization of turning process during machining of AlMg1SiCu using non-dominated sorted genetic algorithm Procedia Materials Science. [Scopus-Science Direct] Accepted 2013
59 Jatti, V.S., Singh, T.P. Nano-particles as Anti-wear and Friction-reduction Additives in Lubricating Oil Journal of Mechanical Science and Technology. [Scopus-Springer] submitted  
60 Kamble, L.V., Panghwane D and Singh T.P Artificial Neural Network Based Prediction of Heat Transfer From Horizontal Tube Bundles immersed in Gas–Solid Fluidized Bed of Large Particles   submitted  
61 Kumar S., Singh R., Batish A., Singh T.P Study the Surface Characteristics of Cryogenically Treated Tool-Electrodes in Powder Mixed Electric Discharge Machining Process Materials science forum Under review